Acrylat-Copolymer
Filmbildender Stoff, der Festigkeit, Flexibilität und langanhaltende Haftung am Nagel bietet.

Acryloylmorpholin
Ein funktioneller Monomer, der zur chemischen Stabilität und Haltbarkeit des Endprodukts beiträgt.

Ethyl Trimethylbenzoyl Phenylphosphinat (TPO-L)
Moderner Fotoinitiator, aktiviert durch LED- oder UV-Licht, sorgt für schnelles, gleichmäßiges Aushärten.
TPO-L ist eine sichere Alternative zu TPO und wird in niedrigen Konzentrationen verwendet.

• Nicht als CMR-Stoff eingestuft.
• Derzeit innerhalb der EU zugelassen.
• Sehr gut geeignet für LED-Aushärtung.

💡 Achtung: Dieses Produkt ist TPO-frei, enthält jedoch TPO-L, eine fortschrittliche und sicherere Variante, die den aktuellen Vorschriften entspricht.

Hydroxycyclohexylphenylketon

Fotoinitiator, der zusammen mit TPO-L arbeitet, um eine tiefe, vollständige Aushärtung unter UV- oder LED-Licht zu gewährleisten.

Eisenoxid (Fe₂O₃), ein Hydrat,

ist ein mineralisches Pigment, das natürliche, warme Töne verleiht. Häufig verwendet in Nude- und Erdtönen.

Kann enthalten (Farbpigmente):

• CI 15510 – Oranger Farbstoff (Orange 4), verwendet für Korallen- und warme Orangetöne.
• CI 77499 – Schwarzes Eisenoxid, sorgt für Tiefe und Intensität in dunklen Farben.
• CI 77891 – Gelbe Lebensmittelfarbe (Yellow 5), verleiht frische, lebendige gelbe oder limonengrüne Töne.

Step 1: Preparing the nails

• Disinfecting hands and nails: Start by disinfecting your hands and nails with a hand sanitizer spray. This prevents bacteria from getting trapped under the products.
• Push back cuticles: Use a Cuticle Pusher to gently push back the cuticles. By pushing back the cuticles, you increase the surface area of ​​the nail and prevent lifting.
• Roughen the nail plate: Lightly file the nail plate with a 240-grit file to remove the shine for better adhesion. This allows the gel polish to bond better to a matte surface.
• Shaping: File the nails into the desired shape with one of our files. This is important for the strength and final look of the nail.
• Optional: E-manicure: Use an electric nail drill with suitable bits use our flat cylinder bit and drop bit to thoroughly clean the cuticles and nail plate. This ensures optimal product adhesion.

Step 2: Degreasing the nails

• Remove dust: Use a dust brush to remove loose dust particles so that they do not get under the product layers and cause unevenness.
• Cleaning nails: Clean the nails with 70% alcohol on a Nail Wipe. this ensures that the nail plate is free of grease, so that the products can adhere better.

Step 3: Applying PH Bond and Sticky Bonder

• Apply PH Bond: Apply a thin layer PH Bond apply to the nail plate to dehydrate the nail and remove excess moisture. This helps prevent lifting.
  
• Apply Sticky Bonder: Then apply our Sticky Bonder Sticky Bonder is applied to the nail plate. This product provides extra adhesion between the natural nail and the base, resulting in a long-lasting and strong nail application. Sticky Bonder contains no harmful acids, making it safe for nails.
  

Step 4: Applying the Base Coat

• Rubberbase: Choose our Rubberbase as a base for a gel polish treatment. The rubber base provides extra flexibility, while BIAB provides extra strength.
• Applying the rubber base: Apply a thin layer of rubber base to the nail. Then apply a thicker layer in the middle, blending neatly into the rubber base. If necessary, close it neatly with a long liner.
• Curing: Cure the base coat under the LED-lamp for 60 seconds or under the UV lamp for 120 seconds.

Step 5: Applying Gel Polish

• First layer of gel polish: Apply a thin layer of the desired Seduce® Gelpolish Apply color. Ensure the layer is even and avoid contact with skin and cuticles, as this can cause lifting.
• Curing: Cure the first layer under the LED lamp for 60 seconds or under the UV lamp for 120 seconds.
• Second coat of gel polish: Apply a second coat for full coverage and intense color. Two coats ensure a smooth, even color and optimal coverage.
• Curing: Cure this layer also under the LED lamp for 60 seconds or under the UV lamp for 120 seconds.

Step 6: Applying the Top Coat

• Apply top coat: Apply our top coat to seal the color and give it a beautiful shine. For extra protection and flexibility, you can use our Rubber Top Coat.
• Curing: Cure the top coat under the LED lamp for 60 seconds or under the UV lamp for 120 seconds.

Step 7: Apply Cuticle Oil

• Moisturize Cuticles: Apply our cuticle oil apply to cuticles to nourish the skin and complete your nail treatment. Gently massage the oil in for extra hydration and nourishment.

Tips for the Best Result

• Apply thin coats: Be sure to apply thin coats for a long-lasting, streak-free finish. This prevents product buildup and ensures a beautiful, natural-looking result.
• Prevent lifting: Avoid contact with skin while painting to prevent lifting. Maintain a clean work environment and use good techniques.
• Use a long liner for precision: Use our Long Liner a brush for a neat finish along the cuticles and sidewalls. This creates a sleek and professional look.

Important Tip:

Always apply thin layers and allow them to fully cure. This ensures a long-lasting and durable finish. Avoid contact with skin, as this can cause lifting and a less attractive result.